The "profiles" can be associated to the device and and its status are available at the "Information about Association" option inside the device at the Endpoint Manager.
Step 1: After adding a profile to the device select Device → Device List → Select the device
Step 2: Select the Associated Profiles inside the device.The following are the parameters available in the associated profiles:
i) Name: It specifies the name of the profile.
ii) Souce Associated: It specifies the type of source associated to the profile. Eg: 'Device'
iii) Information about association: The status of the associated profiles are available here.The following are the status of the associated profiles:
Note: For every 5 minutes ITSM will update the status of the "Information about association" at the end point.
a) Pending: The "Pending" indicates that the profile is in progress to associate with the device.If this "Pending" status is present for the long time and does not changes to " Successfullu processed" state then it indicates that the profile is not associated to the device.Pending specifies that the associating the profile is not completed.
b) Successfullu processed: The "Successfullu processed" indicates that the profile is successfully associated to the device.
Note: Only when the device status is online, the changes in profile can be applied to the endpoint and the profile can be in "successfully processed" state. If the device is in offline state, it will be in the "pending" state until it becomes online.